BEYIMEI PCIE 1X SATA CARD 10 יציאות, 6 GBPS SATA 3.0 CONTRORL CONTRECT

המאפיינים האחרים

●Comply with Serial ATA 3.0 specification, backward compatible with SATA2.0 / SATA1.0:

●Comply with PCI-Express v3.0 specification and backward compatible with PCI-Express v2.0 / 1.0.:

●Support 6.0Gb/s, 3.0 Gbit/s and 1.5 Gbit/s:

●Support hot swap.:

●Compatible with SATA6G, 3G and 1.5G hard drives:

●Motherboard applicable slot PCI-E 1X and above :

Note:

RAID is not supported. The RAID in INTEL only applies to raw SATA. It is an expansion card that cannot support third-party chips.

Speed description information:

1. Use SATA3.0 data cable to achieve the best results.:

(We recommend using this SATA 3.0 card in the PCIE3.0 slot to get the fastest speed.):

2. PCI-E requires a slot above V2.0. For V1.0, the speed will not exceed 250M.:

3. Motherboard BOIS setting:

SATA mode should be changed to AHCI.

Although some motherboards are PCIE 2.0 version, BOIS does not enable gen2 high-speed mode by default and needs to be turned on manually.:

The fastest speed of PCI-E 2.0 is 380-450 m/s.:

Different computer configurations and SATA SSDs have different speeds.:

⭐If the detection is incomplete or unstable, please contact us to send the driver.:

Packing List:

PCIe 1X to 10 Ports SATA 3.0 card *1:

5-port 15pin SATA POWER splitter cable *1:

Low Profile Bracket *1:

SATA cable *10 :