• הנחה
  • משופץ
DC 12V R223C16 16 לוח ממסר ערוץ RS232 DB9 ממשק נשי מודול יציאה סידורי לארדואינו

DC 12V R223C16 16 לוח ממסר ערוץ RS232 DB9 ממשק נשי מודול יציאה סידורי לארדואינו

 
ILS 1.67

קיים
בחנות

DC 12 V R223 C16 16 לוח ממסר ערוץ RS232 DB9 ממשק נשי מודול יציאה סידורי לארדואינו DC 12 V R223 C16 16 לוח ממסר ערוץ RS232 DB9 ממשק נשי מודול יציאה סידורי לארדואינו. DC 12 V R223 C16 16 לוח ממסר ערוץ RS232 DB9 ממשק נשי מודול יציאה סידורי למפרט ארדואינו : מתח עבודה : DC 12 V זרם עבודה : המתנה 18m A, 1 הולכה ממסר 46m A, 2 מחזקה ממסר 73m A, 3 הובלה ממסר 100m A, 4 הולכה ממסרת 126m A, 5 5 הולכה ממסר 153m A, 6 ממסר הולכה 179m A, 7 הממסר נוהג 204m A, 8 ממסרים מתנהלים 230m A . וכו ' פקודה ללא מצב עיכוב) שתי פקודות : בפקודה ובפקודה 8 בתים, שתי הפקודות מוכרות אוטומטית מבלי לעבור. עיכוב מקסימאלי 9999 שניות תחת פקודה עומס מקסימאלי : 10 A/250 VAC, 10 A/125 VAC, 10 A/30 VDC, 10 A/28 VDC, 10 A/12 VDC גודל : 172*65*19 פונקציה : מס ' : ממסר פתוח בדרך כלל קשר : ממסר אישור נפוץ NC NC NC : ממסר בדרך כלל קשר סגור "פתוח" : אין Connect com, NC נתק את com "סגור" : אין ניתוק com, NC מחבר com jog : הזן את פקודת הריצה, הממסר "פתוח", אחרי 500 אלפיות השנייה, הממסר "קרוב" קרוב "נעילה עצמית : הזן את הפקודה הנעילה העצמית, הממסר" פתוח ", הזן שוב את הפקודה הנעילה העצמית, הממסר" סגור ", וכן הלאה : קלט פקודת נעילת ערוץ 1, ממסר ערוץ 1" פתוח ", ממסר ערוץ 2 קרוב; לחץ על ערוץ הקלט 2 למנעול, ממסר ערוץ 2 "פתוח", ממסר ערוץ 1 "סגור"; וכן הלאה עיכוב : הזן את פקודת העיכוב, הממסר "ייפתח", לאחר שהמתין לזמן שנקבע, הממסר "ייסגר"; במהלך העיכוב, לאחר קלט הפקודה הסגירה, הממסר ייסגר באופן מיידי תרשים חיווט 1.


המאפיינים האחרים

Working voltage:
DC 12V
Working current:
standby 18mA, 1 relay conduction 46mA, 2 relay conduction 73mA, 3 relay conduction 100mA, 4 relay conduction 126mA, 5 relay conduction 153mA, 6 relay conduction 179mA, 7 The relay conducts 204mA, 8 relays conduct 230mA... etc.
Open, close, jog, self-lock, interlock, delay, open all, all close 8 working modes (8-byte command without delay mode) :
Two commands:
AT command and 8-byte command, the two commands are automatically recognized without switching.
Maximum delay 9999 seconds under AT command :
Maximum load:
10A/250VAC, 10A/125VAC, 10A/30VDC, 10A/28VDC, 10A/12VDC
Size:
172*65*19
Function:
NO:
Relay normally open contact
COM:
Relay common contact
NC:
Relay normally closed contact
Open:
NO connect COM, NC disconnect COM
Close:
NO disconnects COM, NC connects COM
Jog:
Input the jog command, the relay is open, after 500 milliseconds, the relay is close
Self-locking:
Input the self-locking command, the relay is open, input the self-locking command again, the relay is closed, and so on
Interlock:
Input channel 1 interlock command, channel 1 relay open, channel 2 relay close; press input channel 2 to interlock, channel 2 relay open, channel 1 relay close; and so on
Delay:
Input the delay command, the relay will open, after waiting for the set time, the relay will close; during the delay, after inputting the close command, the relay will be closed immediately
Wiring diagram :
1. Power supply DC 12V, load DC 12V circuit, wiring as shown below. The load LOAD can be DC 12 V devices such as LED lights, fans, motors, cameras, etc.:
2. The power supply is DC 12V, the load is DC 1-100V or AC 85-265 :

הצעות דומות