20 א 300 וולט בקר טעינה סולארית, בקר טעינה עמיד למים באק מיישר סינכרוני מטען סוללות פוטו וולטאי

המאפיינים האחרים

Item Type:

MPPT Solar Controller

Material:

Plastic

Gross Weight:

306g / 10.8oz

Product size:

74x74x32mm / 2.9x2.9x1.3in

Load Discharge Current:

20A

Output Power:

300W

Normally Open:

24 Hours Load Output

Efficiency:

≥95%

Noise:

Application

No Load Loss:

30MA

Voltage Regulation Rate:

1%

Load Regulation:

5%

Full Load Ripple:

400mV

No Load Ripple:

100mV

Discharge Module Input Voltage:

Equal to battery voltage

Load Output Voltage:

Equal to battery voltage

Load Output Current:

30A (Max 32A)

Static Power Consumption:

12mA

Load Output Mode:

Photosensitive

Battery Terminal Short Circuit Protection:

Yes

Load Short Circuit Protection Yes:

Temperature Protection:

Yes

Protection Class:

IP67

Working Temperature:

-40℃-+65℃18

How to Use:

The output and input lines can be connected and installed according to the applicable voltage.:

packing list:

1 x Controller:

Notice:

The MPPT controller should be fixed on an iron or metal bracket to avoid the vibration of the machine due to instability.:

The MPPT controller should allow some space around the enclosure.:

Output and input wires should be kept as short as possible to avoid excessive energy dissipation during transmission.:

There is high voltage and high current in the machine, and non‑professionals are not allowed to disassemble.:

The input and output terminals should be reliable and not loose, so as to avoid heating at the connection point.: