נימה של 1.75 ממ PLA, נימה מדפסת תלת מימדית מתכלים מתכלים קשיחות חזקה גבוהה פגזת פלסטיק פגזת עישון

המאפיינים האחרים

Item Type:

3D Printer Filament

Material:

PLA

Printing Temperature:

190-210℃

Bottom Plate Temperature:

0-60℃

Printing Speed:

20-60mm/s

Density:

1.25 ± 0.05g/cm³

Diameter:

1.75mm ± 0.02mm

Water Absorption:

0.5%

Tensile Strength:

≥ 60Mpa

Bending Modulus:

≥ 60Mpa

Elongation at Break:

≥ 3.0%

Net Weight:

Approx. 1KG / 2.2lb (without plastic tray)

Wire Length:

Approx. 340 meter / 1115.5ft

Tray Size:

Diameter:

Approx. 198mm / 7.8in

Inner Diameter:

Approx. 58mm / 2.3in

Height:

Approx. 63mm / 2.5in

Package List:

1 x 3D Printer Filament:

Note:

Please insert one end of the filament into the fixing hole to avoid being entangled after printing.:

The following methods can help extend the life of consumables:

1. Do not open the package when not in use, and use it as soon as possible after opening;:

2. If it is not used for a time after being unsealed, it is recommended to wrap it in a film bag to prevent it from getting damp;:

3. Store in a cool, dry and ventilated environment as far as possible;:

4. It is recommended to use unsealed consumables within 1 year.: